How do I add a customer logo

MyCleanPOS provides the ability to add a Customer Logo that will print a logo on a specific customers receipts and sales documents, thus overriding the Dry Cleaners or Stores own logos.

To insert a Logo to a specific customer, select a store a shown in the screenshots below

Select the store, in this case ABC Dry Cleaners, and select the Settings button on the top right hand corner

Select Customer option on the left of the screenshot below and a list of customers will appear.

Choose the customer you wish to add a customer logo to. In this case the customer is Brian Smith, and the customer details will be launched as show below

Select Advanced Settings on the lower right of the screenshot above and the option to add a customer logo will appear, as shown below

Follow these steps:
1. Click on the Large/Small Logo
2. Click on the Pen image
3. Add the image
4. Save

Selecting the Advanced option in the customer screen will also provide enable a customers completed orders to be managed, routed and assembled to specific conveyer and arm locations on the Metalprogetti Conveyer system.

Shown below, the Metalprogetti logo is the logo number stored in the Metalprogetti system

For example you can add a location number for the Metalprogetti Logo option, which will allow the conveyer system to identify the particular customer

In this case below, 0 is allocated to *Brian Smith *as the customer shown in the screen shot below

Also as an example, other customers could be allocated identification numbers to the Metalprogetti Conveyer system
2. Hilton hotel Logo
3. Westin Hotel Logo
4. Hugo Boss Store Logo
5. Ford logo
Etc.

The Metalprogetti Arm option shown below is the arm that you want the Metalprogetti assembly system to put the finished orders on – Arm 001, Arm 002, Arm 003, Arm 004 etc or group of Arms. Eg. Group 9010 (Arm001,Arm003). This means that the completed orders can go down both Arm001 and Arm003 or Group 9020 (Arm002 and Arm004) The orders can be sorted to Arm002 and Arm004.

Logo’s for the Thermal printer have a max height of 162px and a max width of 270px on the receipt logo.